Wednesday, March 11, 2015

Jetson TK1 enclosures v2.0 for Array Fire

A few weeks back a fellow from Array Fire contacted me about having a couple of enclosures made for his company’s upcoming attendance at the GTC (GPU Technology Conference).  Notice the lovely logo that’s been etched on the top of the enclosure, a nice touch.  This is version 2.0, since Array Fire didn’t need access to the SATA (through the top) or the GPIOs.  After a protracted USPS 2-day priority delivery ordeal (closer to 6 days) the enclosures arrived, here are some pics +Shehzan shot. 

Jetson TK1 Dev Board Enclosure v2.5

Here's a new, improved version of the enclosure.  More insets and cut outs to allow access to ports and sockets (GPIOs, SATA, Molex for SATA, etc).

Monday, February 9, 2015

Jetson TK1 Dev Board Enclosure

Designed and laser cut an enclosure for the Jetson TK1 development board.  This design uses:
  • 1/8" acrylic plastic
  • 1/16" acrylic plastic 
  • 4 x(3mm x 60mm bolts and nuts)
  • 1/4" diameter (1/8" bore) acrylic tubing  

first three layers

two upper layers

1/4" outer diameter, 1/8" inner diameter
acrylic tubes
finished with 3mm x 60mm screws

 Alternate Orientation