Monday, February 9, 2015

Jetson TK1 Dev Board Enclosure

Designed and laser cut an enclosure for the Jetson TK1 development board.  This design uses:
  • 1/8" acrylic plastic
  • 1/16" acrylic plastic 
  • 4 x(3mm x 60mm bolts and nuts)
  • 1/4" diameter (1/8" bore) acrylic tubing  

first three layers

two upper layers

1/4" outer diameter, 1/8" inner diameter
acrylic tubes
finished with 3mm x 60mm screws

 Alternate Orientation